How To Register Cell Mod By Honeywell
Installing/Programming for Honeywell CELL-CAB-SK Cellular Communicator
Overview:
Honeywell's new Cell-CAB cellular communicator for 6000 series fire panels provides faster communication to key monitoring over traditional cellular methods due to not using Contact ID and DTMF protocols used on POTS (Plain Former Telephone Service). Earlier final installation you should perform a point level exam. Before yous tin utilize the built in point level meter you demand to make sure the SIM is activated and the device is registered with Alert Net. The registration process is performed FROM THE PANEL. You will need to have the burn down panel installed and wired to the CELL-CAB. The CELL-CAB is powered via the panel and does not require or tin employ a separate power connectedness or battery. You will also need the City ID, Central Station ID and Account Number.
Installation:
The Jail cell-CAB does not use the standard Telco connections to receive information from the panel. The CELL-CAB connects to the BLUE "External Communicator Terminal Cake" located on the console. The 4 wire connection is labeled identical to the standard 4 wire comm autobus so do non confuse them every bit being the same data jitney.
Programming:
Using HFSS software get to the Receiver Reporting tab. Right click on Reporting Format and select Cellular.
Then right click on Receiver Credentials and compete the AlarmNet Credentials pop-up box.
When washed, add a reporting channel and configure as needed.
AlarmNet Registration:
Admission the Fire Console Menu and follow the pathway below.
Main Bill of fare > 1. Organization Examination > 8 Register AlarmNet
One time registration is complete the CELL-CAB's built in indicate level meters will function.
How To Register Cell Mod By Honeywell,
Source: http://techresource.online/guides/128
Posted by: staceysenter.blogspot.com
0 Response to "How To Register Cell Mod By Honeywell"
Post a Comment